11 Mil Water-Resistant Synthetic Banner

900

11 Mil Water-Resistant Synthetic Banner was developed to provide the wide-format printing industry with a truly sustainable inkjet-printable solution that incorporates the 3Rs: Reduce, Reuse, and Recycle. This non-woven polyolefin product is an integral part of ABAQA’s Environmental Impact Minimization (EIM) program, which is dedicated to providing products that decrease the environmental impact of the graphics industry.

Compatible with aqueous dye and pigment inks and HP Latex ink.

BenefitsApplicationsCustomers
100% recyclable banner
Weatherproof solution that will not fade, tear, or rip
Wide format banners and durable documents
Maps, Guides, Tags, & Labels
POP/POS retail printers
Sign companies
* Print service providers
SPECIFICATIONS
Material Type100% recyclable HDPE non-woven synthetic
Gauge11 mil
Weight148 gsm
Whiteness132.6% (CIE)
Opacity96.29%
Gloss Level2.9%
Tensile Strength63.64 (MD) Test Method ASTM D5035
Temperature Resistance-100F to 270F, -56C to 104C
Fungus ResistanceYes
Flame RatingClass A Flame Rating
Core Size3” ID core with 2” adaptable insert
Software SettingsThe coating on this product is engineered for 400% ink coverage. Optimal printer settings will vary from printer manufacturers. Recommended heater settings of 122° F (50°C) for both pre and post heaters.
Light FastnessThe fading time of inkjet ink is a direct result of the inks that you choose to use and the environment where the print is displayed. Please consult with your ink manufacturer for light fastness data.
FinishingSynthetic Banner can be sewn, grommeted, or hemmed with Heavy Duty Banner Tape. Grommets should be placed in the hemline along the length of the banner so that the grommet is through two layers. Corner grommets should be placed where the length and width hems cross, so that the grommet is through four layers. A reinforced corner is also recommended to increase durability.
Water ResistanceTo obtain a high degree of water resistance, use only pigmented ink. Allow the print to dry for 24 hours before exposing to moisture. Lamination is not required. Ink saturation over 250% can affect the waterresistant properties and show ink bleed.
Ideal Storage Conditions70° F (21° C), 50% R.H. (a controlled environment is recommended); store in original packaging.
Optimal Service Environment60°-80° F, 20-80% Relative Humidity.
ColorWhite
Ink CompatibilityCompatible with all thermal and piezo inkjet printers using water-based dye and pigment-based inks.
Shelf Life1 year from the ship date when stored in proper conditions.
SKUSize
WRTVK2460-AC24" x 60 ft.
WRTVK3660-AC36" x 60 ft.
WRTVK4260-AC42" x 60 ft.
WRTVK5060-AC50" x 60 ft.
WRTVK6060-AC60" x 60 ft.

👍

Datasheet

Download Datasheet

Product Performance & Suitability: All of the descriptive information and recommendations should be used only as a guide. Furnishing such information and recommendations shall in no event constitute a warranty of any kind. All purchasers shall independently determine the suitability of the material for the purpose for which it is purchased. Seller’s and manufacturer’s only obligation shall be to replace such quantity of the product proved to be defective. Neither the seller nor manufacturer shall be liable either in tort or in contract for any loss or damage, direct, incidental or consequential (Including loss of profits or revenue) arising out of the use of or the inability to use the product. No statement or recommendation not contained herein shall have any force or effect unless in agreement signed by officers of seller and manufacturer.