EnduraFab™ Frontlit FR

800

EnduraFab™ Frontlit FR is a fire retardant, 18-mil / 6 oz / sq yd, 100% polyester warp knit fabric that has excellent drape, is wrinkle resistant, and has an enhanced resistance to scuffing and scratching. A lightweight fabric ideal for drapes, table skirts, exhibits, SEG graphics, retail signage and indoor banners, EnduraFab™ Frontlit FR meets the flammability standard for NFPA 701, 2015 Edition, (Test 1, Small Scale).

EnduraFab™ Frontlit FR is proudly made in the USA.

Product Highlights

FeaturesStrengthsApplications
Specially designed for latex printing.Enhanced resistance to scuffing & scratchingSoft signage
LightweightExcellent drape qualitySilicone edge graphics
Fire Retardant NFPA 701Wrinkle resistanceTablecloth/drapes
Proprietary Surface TreatmentWash-ability, tested in normal washing cycle conditions.

Product Properties

PropertiesDescription
Core Size3-in core
Material100% Polyester
ConstructionWarp Knit
Basis Weight6.0 oz / sq yd (+/- 0.5) / 171 gsm
Thickness18 mil
Whiteness120.71
Brigthness88.58
Opacity75.3%
Gloss Level (60)1.9
Printer/Ink CompatibilityEnduraFab™ Frontlit FR was designed specifically for use with 3rd generation HP latex inks. Printer compatibility can and does vary. Testing is recommended.
Print Durability (Dry Abrasion, after heat set)4 ASTM F 1571-95
Print Durability (Scratch Abrasion, after heat set)2 ISO 1518-2:2011
Finishing/Post ProcessingHeat set is recommended for the FR treated EnduraFab™ Frontlit FR to ensure durability standards reach the desired physicals listed above under durability.
Fire RatingNFPA 701, 2015 Edition, (Test 1, Small Scale).

Item Details

SizeSKU
61 in x 10 ydsEFFLFR6110
61 in x 25 ydsEFFLFR6125
61 in x 50 ydsEFFLFR6150
126 in x 100 ydsEFFLFR126100

👍

Datasheet

Download Datasheet

Product Performance & Suitability: All of the descriptive information and recommendations should be used only as a guide. Furnishing such information and recommendations shall in no event constitute a warranty of any kind. All purchasers shall independently determine the suitability of the material for the purpose for which it is purchased. Seller’s and manufacturer’s only obligation shall be to replace such quantity of the product proved to be defective. Neither the seller nor manufacturer shall be liable either in tort or in contract for any loss or damage, direct, incidental or consequential (Including loss of profits or revenue) arising out of the use of or the inability to use the product. No statement or recommendation not contained herein shall have any force or effect unless in agreement signed by officers of seller and manufacturer.