SEALABLE BOPP THERMAL LAMINATING FILM

It is a heat sealable BOPP-based thermal laminating film, that has one side heat sealable and the other side laminated with thermal active polymer with very high hot-tack and seal strength. It has excellent machinability on high-speed machines and great optical properties.

It is food compliant and its thermal active polymer is specifically designed to improve the bond strength with digitally printed surfaces. Compared to ordinary BOPP thermal laminating film, the peel strength is greatly improved and has a better grasping ink effect.

The thermal film is primarily used in the digital flexible packaging industry, especially with HP Indigo printable flexible packaging films.

Top Layer - Sealable BOPP
Bottom Layer - Thermal Active Polymer

Feature	Benefit
Excellent performance	It has strong adhesive force on digitally printed surfaces and effectively prevent ink flaking and stripping after die-cutting and other finishing demands.
High efficiency	No need of drying and curing after laminating, immediate time to market.
Energy-saving	Laminating temperature is lower than other thermal film, improve efficiency, save cost.
Food Compliance	The product has obtained regulatory approval according to (EU) No 10/2011 of January 2011, GB9683-88 and FDA standard 21CFR 175.300 for food related application.
Customer Validated	Pack Ready Film

Physical Properties

Property	Expected Value	Unit of Measure	Reference Method
Color	Clear/Transparent	NA	Unprinted- Visual Observation
Total Thickness	28	microns	GB/T6672
BOPP Thickness	20	microns	GB/T6672
Thermal active polymer Thickness	8	microns	GB/T6672
Yield	39.3	m2/kg	N/A
Tensile Strength MD TD	103 204	MPa	GB/T1040
Elongation at Break MD TD	163 55	%	GB/T1040
Wetting Tension Thermal active polymer Surface BOPP Surface	≥ 42 ≥ 30	mN/m	GB/T14216
Gloss (45º)	53.4	%	GB/T8807
Haze	3.5	%	ASTM D1003
Heat Shrinkage MD TD	1.0 0	%	Q/CPKDX（120℃30S）
Coefficient of Friction Outside / Outside	0.18	-	GB/T10006
Lamination strength	≥ 5.0	N/inch	GB/T12026-2000
Seal strength	≥ 4.2	N/inch	GB/T12026-2000
WVTR	7.5	g/(m².24h)	BB/T0030-2004
OTR	2000	m3/m².24h.0.1MPa	BB/T0030-2004
Shelf life	12	months	Keep upright in a clean, dry and ventilated warehouse. Storage temperature less than 34ºC

RoHS
Based on information obtained from our component suppliers, this certifies that ALL S-One LP products are “RoHS” compliant and do not exceed the designated levels of Cadmium, Hexavalent Chromium, Mercury, Polybrominated Biphenyls or Polybrominated Diphenyl Ethers. S-One LP products do not contain Deca Brominated Diphenyl Ether (Deca BDE), do not contain as intentional additives Perfluoroocantylsulfonates (PFOS).
REACH
Based on information obtained from our component suppliers, this document also certifies that S-One L&P products are REACH compliant concerning the Registration, Evaluation, Authorization, and Restriction of Chemicals. The materials provided are latex free.
FDA
The contact layer film of the listed products are in compliance with 21 CFR 177.1520(c)2.1 and 3.2, 21 CFR 177.1350 and 178.3297 and may be used in contact with all food types defined in Table 1 of 21 CFR 176.170(c) at conditions of use E-G as defined in Table 2 of 21 CFR 176.170(c).

The information on this data sheet has been established by company based laboratory testing. This information does not imply warranty by S-One Labels & Packaging LLC for product specifications, tolerances, or function in the end use. It is the customer’s responsibility to perform tests to determine the product’s fitness for use for a particular purpose prior to using the product. This document is confidential and may be legally privileged. If you are not an intended recipient or an authorized representative of an intended recipient, you are prohibited from using, copying or distributing the information in this document.

S-One Labels & Packaging, LLC ● Travessera de Gracia 56, Ático 1° • 08006 Barcelona • Spain ● sonelp.com