BOPET GLOSS SEALABLE THERMAL LAMINATING FILM
KDX750TPT30
KDX330TPT30
It is a BOPET-based thermal laminating film with excellent transparency, with high gloss that improves the color saturation. The product is non-toxic and environmentally friendly, with excellent resistance to tear and elongation.
The thermal active polymer is especially designed for improved bonding with digital printing jobs. Compared to the ordinary BOPET thermal laminating film, the peel strength is greatly improved, and has a better grasping ink effect.
This film is primarily used in printing and flexible packaging industry, especially to create pack ready technology when using the HP Indigo 20000 and HP Indigo 6000 series.
Top Layer - BOPET
Bottom Layer - Thermal Active Polymer
Feature | Benefit |
---|---|
Excellent performance | Greatly enhance the colour saturation and brightness, It has strong adhesive force on digitally printed surfaces and effectively prevent ink flaking and stripping after die-cutting and other finishing demands. |
High efficiency | No need of drying and curing after laminating, immediate time to market. |
Energy-saving | Laminating temperature is lower than other thermal film, improve efficiency, save cost. |
Food Compliance | The product has obtained regulatory approval according to (EU) No 10/2011 of January 2011, GB9683-88 and FDA standard 21CFR 175.300 for food related application. |
HP Indigo Validated | Pack Ready Film |
Physical Properties
Property | Expected Value | Unit of Measure | Reference Method |
---|---|---|---|
Color | Clear/Transparent | NA | Unprinted- Visual Observation |
Total Thickness | 20 | microns | GB/T6672 |
BOPET Thickness | 12 | microns | GB/T6672 |
Thermal active polymer Thickness | 8 | microns | GB/T6672 |
Yield | 41.6 | m2/kg | N/A |
Tensile Strength MD TD | 112 121 | MPa | GB/T1040 |
Elongation at Break MD TD | 100 111 | % | GB/T1040 |
Wetting Tension Thermal active polymer Surface BOPET Surface | ≥ 42 ≥ 32 | mN/m | GB/T14216 |
Gloss (45º) | 83.5 | % | GB/T8807 |
Haze | 5.3 | % | ASTM D1003 |
Heat Shrinkage MD TD | 0 0 | % | Q/CPKDX(120℃30S) |
Coefficient of Friction Outside / Outside | 0.45 | - | GB/T10006 |
Lamination strength | ≥ 5.0 | N/inch | GB/T12026-2000 |
Shelf life | 12 | months | Keep upright in a clean, dry and ventilated warehouse. Storage temperature less than 34ºC |
RoHS
Based on information obtained from our component suppliers, this certifies that ALL S-One LP products are “RoHS” compliant and do not exceed the designated levels of Cadmium, Hexavalent Chromium, Mercury, Polybrominated Biphenyls or Polybrominated Diphenyl Ethers. S-One LP products do not contain Deca Brominated Diphenyl Ether (Deca BDE), do not contain as intentional additives Perfluoroocantylsulfonates (PFOS).
REACH
Based on information obtained from our component suppliers, this document also certifies that S-One L&P products are REACH compliant concerning the Registration, Evaluation, Authorization, and Restriction of Chemicals. The materials provided are latex free.
FDA
The contact layer film of the listed products are in compliance with 21 CFR 177.1520(c)2.1 and 3.2, 21 CFR 177.1350 and 178.3297 and may be used in contact with all food types defined in Table 1 of 21 CFR 176.170(c) at conditions of use E-G as defined in Table 2 of 21 CFR 176.170(c).
The information on this data sheet has been established by company based laboratory testing. This information does not imply warranty by S-One Labels & Packaging LLC for product specifications, tolerances, or function in the end use. It is the customer’s responsibility to perform tests to determine the product’s fitness for use for a particular purpose prior to using the product. This document is confidential and may be legally privileged. If you are not an intended recipient or an authorized representative of an intended recipient, you are prohibited from using, copying or distributing the information in this document.
S-One Labels & Packaging, LLC ● Travessera de Gracia 56, Ático 1° • 08006 Barcelona • Spain ● sonelp.com
Updated less than a minute ago