20oz. Wallcover Sand (Woven, Fabric Back)
20oz. Wallcover Sand is an environmentally friendly Type II PVC wallcovering that meets EPA requirements for low VOC-emitting products and Class A Fire Rating. Free of Phthalate, this wallcovering is idea for sensitive environments, such as healthcare facilities, schools and more. 20oz. Wallcover Sand is an ideal product for print service providers, design firms and sign companies looking to break into the decor market. Compatible with latex, eco-solvent, solvent and UV inks.
| Benefits | Applications | Customers |
|---|---|---|
| - Type II PVC - Commercial Grade, Class A Fire Rating - Meets EPA requirements for low VOC emitting products - Phthalate free substrate - Compatible with all latex, eco-solvent, solvent and UV Inks | - Corporate environment murals - Healthcare facilities - Retail - Entertainment venues | - Large format print service - Design firm/ad agency - In-house - Federal government - Schools - Sign companies |
| SPECIFICATIONS | |
|---|---|
| Material Type | 100% PVC Face |
| Backing | Polyester/Cotton Woven Backing |
| Gauge | 18 mil |
| GSM | 448 |
| Weight | 20 oz./linear yard |
| Whiteness | 89.44 |
| Brigtness | 87.10 |
| Opacity | 100% |
| Gloss Level | 6.4 (60) |
| Finish | Liquid coating can be applied for extra protections and finish. |
| RIP & Printer Media Settings | Optimal printer settings will vary from printer manufacturers. A suggested starting point is setting the pre and post heaters to 122° F (50° C). For the best and most consistent results a profile should be created using an external color calibrator in conjunction with your RIP and color matching software. If a custom profile is not available, the on-board media setting, Cast Vinyls, typically used for vehicle wraps, is a good place to start. |
| Light Fastness | The fading time of inkjet ink is a direct result of the inks that you choose to use and the environment where the print is displayed. Contact the ink manufacturer for light-fastness data. |
| L* | 94.33 |
| A* | -0.18 |
| B* | -0.62 |
| Flame Rating | Class A |
| Core Size | 3” ID core |
| Optimal Service Environment | For printing: 60°-80° F, 50% Relative Humidity. For end use: -40°-176° F (-40°-80° C). |
| Ideal Storage Conditions | 70° F (21° C), 50% R.H. (a controlled environment is recommended); store vertically in original packaging. |
| Color | Bright white PVC |
| Ink Compatibility | Compatible with all low-solvent, solvent, UV-curable and latex printers. |
| Shelf Life | 1 year storage in original package under recommended storage conditions above. |
| SKU | Size |
|---|---|
| WCOS205475 | 54 in x 75' ft (Sample Roll) |
| WCOS2054150 | 54 in x 150 ft |
Datasheet
Product Performance & Suitability: All of the descriptive information and recommendations should be used only as a guide. Furnishing such information and recommendations shall in no event constitute a warranty of any kind. All purchasers shall independently determine the suitability of the material for the purpose for which it is purchased. Seller’s and manufacturer’s only obligation shall be to replace such quantity of the product proved to be defective. Neither the seller nor manufacturer shall be liable either in tort or in contract for any loss or damage, direct, incidental or consequential (Including loss of profits or revenue) arising out of the use of or the inability to use the product. No statement or recommendation not contained herein shall have any force or effect unless in agreement signed by officers of seller and manufacturer.
Updated over 1 year ago